| Artikelnummer | PM100WT1 |
| Marke | E Ink |
| Größe | 10.0 |
| Anwendung | IA |
| Auflösung | 800×480 |
| Komposition | LCM |
| Helligkeit | 350 |
| CR | 400:1 |
| Farben | 262K |
| Hintergrundbeleuchtung | CCFL |
| Schnittstelle | TTL |
| Panel-Marke | E Ink |
| Panel-Modell | PM100WT1 |
| Plattentyp | a-Si TFT-LCD , LCM |
| Panelgröße | 10.0 inch |
| Auflösung | 800(RGB)×480 , WVGA |
| Anzeigemodus | TN, Normally White, Transmissive |
| aktiver Bereich | 216×129.6 mm |
| Umriss | 233.3×145.25×12.1 mm |
| Oberfläche | Antiglare |
| Helligkeit | 350 cd/m² (Typ.) |
| Kontrastverhältnis | 400:1 (Typ.) |
| Farben anzeigen | 262K (6-bit) |
| Reaktionszeit | 15/25 (Typ.)(Tr/Td) |
| Blickwinkel | 60/60/40/55 (Typ.)(CR≥10)(L/R/U/D) |
| Frequenz | 60Hz |
| Lampentyp | 1 pcsCCFLWithout Driver |
| Signalschnittstelle | Parallel RGB (1 ch, 6-bit), 30 pins |
| Eingangsspannung | 3.3V (Typ.) |
| Anwendung | IA |
| CLAA100XA22XV | CPT | 10.0 | 1024×768 |
| HSD100PXN1-A00 | HannStar | 10.0 | 1024×768 |
| HSD100PXN1-A00-C11 | HannStar | 10.0 | 1024×768 |
| LT100AA40000 | TOSHIBA | 10.0 | 800×600 |
| PM100WX2 | E Ink | 10.0 | 800×480 |
| PM102WX1 | E Ink | 10.2 | 800×480 |
| PM102ZY2 | E Ink | 10.2 | 1024×600 |
| PW100XS5 | E Ink | 10.0 | 640×468 |
| SVA101WV1(01TA)(A) | SVA-NEC | 10.0 | 1024×576 |
| TM100SV-A01-01 | SANYO | 10.0 | 800×600 |
| AA084VC03 | Mitsubishi | 8.4 | 640×480 |
| AC156GA01 | Mitsubishi | 15.6 | 1366×768 |
| ET057010DMU | EDT | 5.7 | 640×480 |
| G057AGE-T01 | Innolux | 5.7 | 320×240 |
| G150XG03 V5 | AUO | 15.0 | 1024×768 |
| G321EV5B000 | SII | 4.7 | 320×240 |
| KCG057QV1DB-G500 | Kyocera | 5.7 | 320×240 |
| LQ104V1DW02 | SHARP | 10.4 | 640×480 |
| LQ10D421 | SHARP | 10.4 | 640×480 |
| PM070WX9 | E Ink | 7.0 | 800×480 |